RTA Techni Mobili RTA-4985, Руководство по сборке, Страница: 9 / 18

P.9
10
11
13
12
RTA-4985
Right
Left
14
14
SCREWS
C
4PCS
3X15 MM
30
Grab the other set of the Drawer Sliders (14) and separate the flat
ones from the “L” shaped ones. Place the drawer upside- down as
shown and use screws C to assemble the “L” shaped Sliders to the
Bottom Drawer Left & Right Panels (30 &31) as shown.
IMPORTANT: REFER TO THE DRAWINGS FOR THE CORRECT
POSITION OF THE SLIDERS.
If they get installed incorrectly,
the drawers will raise 1" with a gap at the bottom and the top
drawer will not close!
32
24
SCREWS
4X20 MM
D
2PCS
Use screws D to fix the Handle (24) to the
Bottom Drawer Front Panel (32).
X4
4
7
SCREWS
16PCS
4X14 MM
F
Use screws F to assemble the Base Tubes (7)
to the CPU Bottom Panel (4).
4
X4 3
Insert the Studs (3) into
the Base Tubes (7) and
tighten them well at the
same level.
14
SCREWS
4PCS
6X25 MM
K
First screw bolts K to the CPU Back Panel (5), then
assemble the CPU Left & Right Panels (1 & 2) as explained
in page 5. Please note: The CURVED side of the panels
are the FRONT of the cabinet, and the panels are WIDER
at the bottom than at the top.
Screw the Metal Pin (9) to the CPU Right Panel (2).