Assembly Instructions
Model AVM-005
Stage 1
Please note stand is best assembled from the bottom up.
1.1 Place foot bolts (FB) through bottom shelf (B Glass), Foot (F-WD) and the holes at the bottom of the cable
tidy (CT). Then screw the foot bolts into the cable tidy nuts until tight.
1.2 Screw in I bolts (IB-3) to top of each foot tube (FT).
1.3 Place I bolts in the foot tubes through bottom shelf. Then screw tubes (TB-2) onto each exposed bolt until
tight.
1.4 Screw in I bolts to the top of each tube (TB-2).
1.5 Place middle shelf (M Glass) in position over each tube leg with I bolts passing through holes in each
corner of the shelf and resting on support pegs located on cable tidy.
1.6 Repeat the same stage of 1.5 to assemble other middle shelves.
Stage 2
2.1 Screw tubes (TB-1) onto I bolts until tight.
2.2 Screw in I bolts (IB-2) to top of tubes (TB-1).
2.3 Place top shelf over I bolts resting on tubes.
2.4 Secure top shelf (T Glass) with chrome caps. (Screw the large chrome caps to the top of the tubes and
screw the small chrome caps to the holes of cable tidy until tight.)
Page 3/3