RTA 460MSBC-NNA1 Скачать руководство пользователя

Страница: 54 / 66

Real Time Automation, Inc.

1-800-249-1612

Diagnostics

– Modbus TCP/IP Server

Select the

Modbus TCP/IP Server

in the dropdown menu on the Diagnostics Page to view a breakdown

of the diagnostics and common strings that are displayed on the page. Additional diagnostic information
can be found by clicking the

Help

button.

NOTE

: This page will auto-refresh every five seconds with the latest data.

Clear All Values

- This will only affect displayed values.

This will reset all displayed values back to zero.

If viewing Modbus TCP/IP Server, this will only clear the values for the Modbus TCP/IP Server
section of the gateway.

Device Status

Connected - A Modbus TCP/IP client has a connection for the gateway.

Not Connected:
a)

Ethernet Cable not plugged in.

The Modbus TCP/IP client has not initiated communication to the gateway.

The Modbus TCP/IP client has not communicated to the gateway in “x” milliseconds, where “x”

is the inactivity timeout specified in the Modbus TCP/IP Server Configuration.

LED Status:

Solid Green (Connected and Running)

–

The gateway is connected to a Modbus TCP/IP client and

communicating as expected.

Flashing Green (Connection not yet attempted)

–

The Modbus TCP/IP client has never attempted to

connect to the gateway.

Flashing Red (Nodes Missing Timeout) - The gateway has lost a connection to the Modbus TCP/IP
client.

Off:
a)

No power.

Содержание 460MSBC-NNA1



































































Результаты поиска

Содержание 460MSBC-NNA1

Отзывы:

Похожие инструкции для 460MSBC-NNA1

Бренды по названию

Популярные бренды

RTA 460MSBC-NNA1, Руководство пользователя

Результаты поиска

Содержание 460MSBC-NNA1

Отзывы:

Похожие инструкции для 460MSBC-NNA1

Бренды по названию

Популярные бренды