Real Time Automation, Inc.
39
1-800-249-1612
Web Interface Data Point List Configuration: Manual Mode
1)
To transition from either of the two Auto-Configure Modes to Manual Configure Mode, click the
dropdown at the top of the Web Interface Configuration page and select Manual Configure.
a)
When prompted, click
OK
to confirm mode change or
Cancel
to remain in Auto-Configure Mode.
2)
Once OK is clicked, there are two options on how to proceed:
3)
To keep the data points that are already configured, press
OK
.
a)
You would want this option if you are adding additional data points or you want to modify the
data point(s) that already exist.
4)
To delete the data points that are already there and start over, press
Cancel
.
Configuring Read and Write Data Points
Follow these steps to manually configure read and write data points. Most of the time, the # of
Read/Write Data Points number should be left at the value generated during the Auto-Configure
method. However, if additional points need to be added, or manual configuration is preferred, enter the
desired number of data points in these boxes.
1)
Generate Data Points:
Once values in the number of read/write data points has been changed, click
this button to have them auto-generate. These new data points may be configured after they have
been generated.
2)
Select the
View Read Data Points
or
View Write Data Points
button.
