background image

Do not exceed the weight limits.

Do not expose the surfaces to direct sunlight or to extreme environmental conditions.

Clean the surfaces preferable with a soft cloth damped with a solution of mild soap and water,

then dry with a clean towel.

If you decide to apply a cleaning agent, first test on a small area of the unit that is hidden from

view, for example, under the keyboard panel.

Do not sit on the tabletop.

Do not allow small children to climb over the unit, play underneath, or reach inside the drawers

and compartments without your supervision.

Before moving the unit within the same room or to an adjacent room:

a)

Remove all objects from the tabletop, drawers and shelves that are heavy or might fall off.

b)

The unit must be handled by at least 2 persons

c)

Use both of your hands and bend your knees, not your backs.

To transport the unit to a location far away from its current location, it is recommended to

properly secure it to avoid breakage during transit.

The warranty does not extend to damages caused by accidents, own errors, incorrect assembly,

negligence, improper use, modifications, or not heeding the above warnings.

The warranty is valid only within the continental United States. If you reside in Hawaii, Puerto

Rico, U.S. Dependencies or other countries, please contact the supplier from where the unit was

purchased.

Making any kind of modification to the unit voids the manufacturer’s warranty.

For details on the warranty, please refer to the Warranty Document included with the product,

or visit online:

technimobili.com/pages/techni-mobili-desk-warranty

40Kg (90 Lbs)

4.5Kg (19 Lbs)

4.5Kg (10 Lbs)

4.5Kg (10 Lbs)

4.5Kg (10 Lbs)

4.5Kg (10 Lbs)

Содержание Techni Mobili RTA-8408

















Отзывы: