P.13
RTA-3520
P.13
• Insert the drawers into the cabinet, starting with the bottom one, then
the middle, then the top one. Insert at an angle with their fronts facing
down, making sure the wheels from the drawer slide in the middle of
the sliders inside the cabinet.
• If the top drawer doesn’t fit, and there is a gap at the bottom and/or
the top drawer hits the top panel, make sure the drawers are sliding
through the cabinet sliders, not on top of them. Also review the
assembly done in steps
2
and
19
for the correct assembly of the
sliders.
STEP 20
19
19
19