RST meteoscan 937PRO, Руководство по эксплуатации, Страница: 31 / 68

RST01937 meteostanciya
page 31
Maintenance
1. Clean the rain gauge once every 3 months. Rotate the funnel counter-clockwise and lift
to expose the rain gauge mechanism, and clean with a damp cloth. Remove any dirt,
debris and insects. If bug infestation is an issue, spray the array lightly with insecticide.
2. Clean the solar radiation sensor and solar panel every 3 months with damp cloth.
3. Replace batteries every 1-2 years. If left in too long, the batteries may leak due to envi-
ronmental challenges. In harsh environments, inspect the batteries every 3 months (when
cleaning the solar panel).
3. When replacing the batteries, apply a corrosion preventive compound on the battery
terminals, available at Amazon and most hardware stores.
5. In snowy environments, spray the top of the weather station with anti-icing silicon spray
to prevent snow build up.
Troubleshooting Guide
Problem Solution
Wireless remote (thermo-
hygrometer) not report-
ing in to console.
There are dashes on the
display console.
There are dashes on the display console. The maximum line of sight
communication range is about 600’. Move the sensor assembly
closer to the display console.
The maximum line of sight communication range is about 600’.
Move the sensor assembly closer to the display console.
Resynchronize the remote sensor(s). Reference Section 3.3.
Install a fresh set of batteries in the remote sensor(s).
Make sure the remote sensors are not transmitting through solid
metal (acts as an RF shield), or earth barrier (down a hill).
Radio Frequency (RF) Sensors cannot transmit through metal bar-
riers (example, aluminum siding) or multiple, thick walls.
Move the display console around electrical noise generating de-
vices, such as computers, TVs and other wireless transmitters or re-
ceivers.
RST01937Manual 25.10.2017 11:57 Страница 31