RST IQ735, Инструкция по эксплуатации, Страница: 37 / 40

weather forecast setting
•Press and hold “meteo set” for 3 seconds, it will enter into the corresponding parameter setting of the
air pressure. When the setting item is in blink, press “UP” or “DOWN” button can change the current
parameter, then press “meteo set” button to confirm the setting item and enter the next setting item.
The sequence takes turn to be the current air pressure data, the current weather forecast pattern, the
weather forecast sensitivity. It will exit the setting mode and save the setting item automatically exit in
20 seconds without any adjustment.
•Weather forecast in animation with Sunny,
Slightly Cloudy, Cloudy, Rainy, stormy and snow,
take the following pictures as reference:
•There are four grades for the sensitivity of the
weather forecast. Grade 1 is the most sensitive,
grade 4 is the least sensitive. User can change
this setting according to the using condition, and
choose the best sensitivity fit for the current
environment.
•When it is in the normal mode, press once
“meteo set” button to check the recorded air
pressure reading in the past 24 hours. If the
weather station was just installed with batteries
and past data was not yet measured, it will dis-
play “- - - . -”
•Press and hold “down” button for 3 seconds, it
can choose the different unit for the air pressure,
such as inHg, mB/hpa, mmHg.
37