RST IQ715, Инструкция по эксплуатации, Страница: 28 / 32

If no same ID signal received in 1 hour, display contents will disappear, no saving ID. And
will start 3-minute RF reception. If register is successful, continue synchronous reception, if
it is failed, start 3 minutes reception in each hour.
Priority: If RF long reception is at the same as RCC, RCC first, and RF reception will start after
finishing RF reception. When AL and RCC reception are at the same time, AL first, then
RCC, and RF is the last.
RCC reception conditions:
1. RCC automatic reception 3 days after turning on or resetting the clock.
2. Hold “-“ for more than 2 seconds to enter RCC reception.
3. Automatic reception at everyday.
Automatic reception: coercive reception at 3:00, 4:00, 5:00, 6:00 every day. After 6:00,
no matter reception is successful or failed no reception again at the whole day. RCC
reception time is 10 minutes.
RCC reception icon:
1. When it is entering the RCC reception, the symbol rcc is flashing.
2. When the signal reception succeed, the symbol rcc will full display and then exit
reception mode.
When the clock is in the RCC reception, hold “-“ for more than 2 seconds to exit RCC
reception mode.
If the reception is failed in the same day, the next reception time is next 1:00.
During the RCC reception, when the alarm is ringing, the clock will exit RCC reception and
switch to alarm.
RST 02715 28
RCC reception
02715-Manual:02715-Manual 28.10.2010 12:36 Page 28