L900 RSTAR Array Radio Series System
ELM0077I
RST Instruments Ltd.
Page 4
F
IGURE
3-1
L
OGGER
N
ET
™
B
ACKUP
S
CREEN
5
Use the file dialog to select the '.bkp' file located on the USB drive and follow the
on-screen instructions. The configuration to communicate with the FlexDAQ
logger will be loaded.
6
Click 'Apply' in the bottom left corner to save the settings.
7
Select the Com Port from the top of the network tree within the 'Entire Network'
panel if connecting to the logger or base station radio over USB. Refer to Figure
3-2.
8
Click the 'Install USB Driver' button on the Hardware panel. Choose the
appropriate interface from the resulting dialog. Refer to Figure 3-2.
