manualshive.com logo in svg

RSS M-400, Руководство пользователя

Owner'S Manual к RSS M-400 доступен для скачивания бесплатно с нашего сайта. Этот manual предоставляет подробные инструкции по использованию и уходу за вашим устройством. Загрузите его сейчас с manualshive.com и узнайте все о возможностях этого продукта.

Поделиться
Скачать
background image

 

222

Appendix

 

Appendix

 

EQ library

 

Number Name

Description

 

P000

EQ Flat

Default settings for EQ.

P001

Hi Pass   

Hi Pass

P002

Notch

Notch

P003

Band Pass

Band Pass

P004

Lo Pass

Lo Pass

P005

Kick 1

Full bass sound suitable for bass drum. Enhances lows and highs with reduction of frequencies around 
280Hz. No Filter.

P006

Deep Kick

Extra boost on low end and frequencies around 3kHz to enhance sound of bass drum. No Filter.

P007

Snare 1

Boosted frequencies around 2.00kHz, enhanced highs for snare drum. Hi Pass Filter to reject rumble and 
leakage from bass drum.

P008

Snare 2

Enhanced highs, reduction of frequencies around 266Hz for snare drum. No Filter.

P009

Toms

For tom tom drums, reduced frequencies around 560kHz to avoid ringing, enhanced highs for clarity. No Filter.

P010

Crash Cymbal

Boosted high frequencies to enhance cymbal sounds. Hi Pass Filter to reject rumble and leakage from drums.

P011

Ride Cymbal

Boosted mid and high frequencies to enhance cymbal sounds. Hi Pass Filter to reject rumble and leakage 
from drums.

P012

Shaker

Boosted mid and high frequencies to enhance handheld shaker and other high pitched percussion instru-
ments. Hi Pass Filter to reject rumble and leakage from drums.

P013

Percussion

Enhanced frequencies around 3kHz for percussion instruments. Hi Pass Filter to reject rumble and leakage 
from drums.

P014

Bass 1

Boosted frequencies around 100Hz for Bass. Enhanced high mids for clarity, Hi Pass Filter at 30Hz.

P015

Deep Bass

Boosted low frequencies, reduced frequencies around 190kHz for deeper bass sound. No Filter.

P016

Piano Solo

Full and rich sound for solo piano or to accompany another instrument or vocalist. No Filter.

P017

Piano Band

Allows piano to fit well in a typical pop band. Enhanced frequencies above 3.0kHz to add clarity. Low end 
reduced to avoid clash with bass player. Hi Pass Filter at 80Hz.

P018

AGuitar Solo   

Full and rich sound for solo Guitar or to accompany another instrument or vocalist in small group. Hi Pass 
Filter at 50Hz.

P019

AGuitr Band

Allows guitar to blend in a typical pop band. Low end reduced to avoid clash with bass player. Hi Pass Filter 
at 100Hz.

P020

Nylon Guitar   

Lightly enhances frequencies above 3.0kHz for Nylon Guitar. Hi Pass Filter at 100Hz.

P021

EGuitr Band

Boosted frequencies around 3.0kHz to help guitar cut through and blend in a typical pop band, using vari-
ous guitar sounds and effects. Hi Pass Filter at 50Hz.

P022

EGuitr Jazz

Lightly enhanced bass for full and rich sound for jazz guitar in solo or ensemble. Hi Pass Filter at 50Hz.

P023

EGuitr Clean

Clear sound for Electric Guitar with no overdrive or distortion. Hi Pass Filter at 50Hz.

P024

EGuitr Disto

Enhances Electric Guitar with overdrive or distortion. Hi Pass Filter at 50Hz.

P025

EGuitr Heavy

Big sound for heavy metal style Electric Guitar with distortion. Boosts frequencies around 170Hz and above 
3.5kHz. Hi Pass Filter at 67Hz.

P026

Synthesizer

Good for wide range of synthesizers sounds, solo or in a typical pop band. No Filter.

P027

Female Voc 1

Near flat EQ for female singing voice. Hi Pass Filter at 100Hz to reduce rumble.

P028

Female Voc 2

Reduced bass, enhanced frequencies around 315Hz and above 5kHz for female singing voice. Hi Pass Filter 
at 80Hz to reduce rumble.

P029

Male Voc 1

Enhanced frequencies around 2.0kHz for clarity of Male singing voice. Hi Pass Filter at 80Hz to reduce rumble.

P030

Male Voc 2

Reduced 400Hz, enhanced bass and frequencies above 2.0kHz for clarity of Male singing voice. Hi Pass Fil-
ter at 80Hz to reduce rumble.

P031

Narrator

Enhances clarity for Narration occurring over music or other background sounds. Bass reduced to avoid 
muddiness. Hi Pass Filter at 80Hz to reduce rumble.

P032

Radio Voice

Boosted bass, reduced frequencies around 422Hz, and enhanced frequencies above 2.0kHz sound for spo-
ken word. Hi Pass Filter at 80Hz to reduce rumble.

P033

Spoken Word

Basic setting for voice for solo spoken word. Enhanced high mid for added clarity. Hi Pass Filter at 80Hz to 
reduce rumble.

P034

HiHat

EQ to enhance the sound of hihat cymbals. Bass reduced to avoid leakage from kick and other drums. Hi 
Pass Filter at 100Hz to reduce rumble.

P035

DrumOverHead Lightly enhanced high mids adds clarity for overhead mic on drum kit. Hi Pass Filter at 100Hz to reduce rumble.

P036

Brass & Wind

Lightly enhanced high mids adds clarity for brass or wind instruments. Hi Pass Filter at 80Hz to reduce rumble.

P037

Choir

Reduced frequencies below 600Hz to help clarity for choir. Hi Pass Filter at 80Hz to reduce rumble.

M-400_v15_e.book 222 ページ ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M-400

Tascam M-16 Operation & Maintenance Manual preview
M-16
Бренд: Tascam Страницы: 51
TC Electronic Viscous Vibe User Manual preview
Viscous Vibe
Бренд: TC Electronic Страницы: 27
TC Electronic SHAKER VIBRATO User Manual preview
SHAKER VIBRATO
Бренд: TC Electronic Страницы: 13
TC Electronic DITTO X2 LOOPER Quick Start Manual preview
DITTO X2 LOOPER
Бренд: TC Electronic Страницы: 2
TC Electronic corona User Manual preview
corona
Бренд: TC Electronic Страницы: 2
Oster FPSTHB5103B Instruction Manual preview
FPSTHB5103B
Бренд: Oster Страницы: 26
Radial Engineering JDI User Manual preview
JDI
Бренд: Radial Engineering Страницы: 12
HURAKAN HKN-KS10 Manual preview
HKN-KS10
Бренд: HURAKAN Страницы: 32
Sanlida SM-1502 Instruction Manual preview
SM-1502
Бренд: Sanlida Страницы: 6
UFESA BP3443 Manual preview
BP3443
Бренд: UFESA Страницы: 52
Fender 0234573000 Owner'S Manual preview
0234573000
Бренд: Fender Страницы: 9
Kambrook KSB70 series Instruction Booklet preview
KSB70 series
Бренд: Kambrook Страницы: 20
Princess 01.221206.02.001 Instruction Manual preview
01.221206.02.001
Бренд: Princess Страницы: 8
Smeg HMF01PKAU User Manual preview
HMF01PKAU
Бренд: Smeg Страницы: 2
Kremlin CYCLOMIX MICRO Instructions Manual preview
CYCLOMIX MICRO
Бренд: Kremlin Страницы: 12
Kushlan 450DD Operating Instructions And Parts Manual preview
450DD
Бренд: Kushlan Страницы: 11
Kushlan 350DD Operating Instructions And Parts Manual preview
350DD
Бренд: Kushlan Страницы: 16
Kushlan 350W Assembly & Operating Instructions preview
350W
Бренд: Kushlan Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды