manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 186

 

186

 

Management of the M-48 live personal mixer

 

Management of the M-48 live personal mixer

 

Each musician will be able to use their M-48 with greater comfort 
and convenience if the mixing engineer has made the appropriate 
settings for each M-48. In particular, the mixing engineer should 
consult with each musician when assigning sources to groups. Each 
musician can decide what sources they want assigned to which 
knobs (groups).

The following settings are made by the mixing engineer.

•

 

Specifying the outputs from the M-380 to the M-48 unit

 

Editing screen:PATCHBAY screen (p. 186)

•

 

Editing the M-48’s unit name

 

Editing screen:M-48 MANAGER popup (p. 187)

•

 

Making preference settings for an M-48 unit

 

Editing screen:M-48 PREFERENCES popup (p. 191)

•

 

Setting the level, pan, and AUX switch for each source 

(Source Level/Pan setting)

 

Editing screen:M-48 SOURCE LEV/PAN popup (p. 193)

•

 

Assigning sources to groups (Source Assign settings)

 

Editing screen:M-48 SOURCE ASSIGN popup (p. 196)

The following settings and management functionality for the M-48 
are also provided.

•

 

Viewing the connected M-48 units

 

Editing screen:M-48 MANAGER popup (p. 187)

•

 

Checking and adjusting the musician’s mix (Group Mix)

 

Editing screen:M-48 GROUP MIX popup (p. 198)

•

 

Muting the output of an M-48 unit

 

Editing screen:M-48 MANAGER popup (p. 189)

•

 

Disabling memory operations from the M-380 (MEMORY 

SAFE function)

 

Editing screen:M-48 MANAGER popup (p. 189)

•

 

Copying M-48 settings

 

Editing screen:M-48 COPY popup (p. 200)

•

 

M-48 memory operations

 

Editing screen:M-48 MEMORY popup (p. 201)

•

 

Using the M-48 library

 

Editing screen:M-48 LIBRARY popup (p. 203)

•

 

Saving/loading USB memory

 

Editing screen:M-48 LOAD/SAVE popup (p. 205)

•

 

Synchronizing scene memories with M-48 memories

 

Editing screen:SCENE screen (p. 125)

The M-48’s settings are stored in each M-48 unit itself. The M-380 can 
load and manage the settings of each connected M-48 unit.

There are two ways to store the M-48’s settings on an external device.

• Store the settings in the M-380’s M-48 library (p. 204)

• Save the settings to USB memory (p. 206)

Use the REAC B output patchbay to specify the outputs from the M-
380 to the M-48.

 

1.

 

In the SETUP section, press [PATCHBAY] to access the 
PATCHBAY screen.

 

fig.ScrPatchbay1.eps

 

2.

 

Press [F2 (OUTPUT)] or [F4 (REAC B)] to view the REAC B 
output patchbay.

 

fig.ScrPatchbay2.eps

 

3.

 

Use the patchbay grid to select the channels that will be 
output to the M-48.

 

For example, you might make settings as follows.

 

 By using direct out from the PRE EQ or PRE FADER positions, 
you can create a mix in which the M-48’s source level/pan 
settings are independent of the M-380.

 

If you use direct out from the POST FADER position, each 
source will be output at the level determined by the M-380’s 
channel fader. In this case the actual LEVEL setting of the M-48 
source is controlled by the M-380 fader.

In addition to input channel direct outs, you can use a variety of 
outputs as sources for the M-48.

 

Editing and managing M-48 

units

 

Where the settings are stored

 

Specifying the outputs from 

the M-380 to the M-48 unit

 

REAC B

Channel

Purpose

 

1–6 OUT

AUX9–AUX14

S-1608 stage outputs

7–8 OUT

MAIN L, MAIN R

9–40 OUT

CH1–CH32 direct out

M-48 sources

M-380_e1.book 186 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды