background image

Do not open this product by yourself for adjustment.
If water goes into this product, please turn off the power immediately and 
send it to after-sale service department of our company for handling.

One receiver cannot receive signal from two same frequency microphones 
simultaneously. Other microphone with different frequency or brand cannot 
be used for this receiver.

CAUTI ON

During Setup and Installation

To reduce the risk of electric shock, use only the specified power voltage.

To prevent damage from dropping or inclining , do not put
equipment on shaking, inclining etc. unstable place. 

To reduce the risk of fire or electric shock caused by continued use 
when abnormity occurs, please pull out power plug and contact 
our dealer when the following happens:
1.When smoke comes out from this equipment and peculiar smell
   can be smelt.
2.Water or other article goes into this equipment.
3.Drop on the ground and cover is damaged.
4.Power cord damaged (core comes out or cord is broken).
5.No sound output.

 

Caution

Forbidden

Forbidden

Forbidden

Forbidden

Pull Out 
AC Plug

To prevent hurt from heavy article dropping, do not put heavy 
article on the top of this equipment.

 

During Operation

 

Caution

 

 

 5

 

Содержание RW-4002U








Отзывы: