RSP STC350, Руководство по эксплуатации продукта

Страница: 30 / 48

30 M0605-1 ver 2.5
3.5 Manual unlocking of swivel with tool changer
Action Note
1 Safety Read the safety section (1.1).
2 Park the tool Park the tool on a tool stand or table.
NOTE! Make sure that the tool attachment
and tool are fully supported by a tool stand
or table.
3 Service position Place the robot in service position.
4 Pneumatic air off NOTE! The pressure in the pneumatic
system must be released before
dismounting begins.
5 Power off Switch the power off and lock the circuit
breaker.
NOTE! Read the safety chapter for the
robot.
5 Release air connections Release air hoses at air connections
marked
“7” and “8”.
6 Release tool attachment Connect compressed air to the air
connection marked
“8”. Exhaust air is
evacuated via connection marked
“7”.