6
Set the machine to the wall
x6
x1
x6
x1
output ground.*
8 mm Ø
10 mm Ø
x1
output ground.*
* This ringbolt mounting (optional) is used to derive the output
block to the ground.
Make four holes in the wall to the indicated height, insert the plugs first and screw the four screws
into the wall. Then install the rail to the block of wall outlet to the indicated height, with the
indicated plugs and screws.
ADJUSTING THE HANDLE POSITION
Click on this link
http://bit.ly/RSPconicPROtechnician
to see:
The most important technical features of our RSP Conic Pro, how you can assembly it,
how the rope is adjusted and how the pulleys and the rope are changed. We also
explain how to improve it and give you some useful tips.
