RSL Speedwoofer 10S, Руководство пользователя

Страница: 4 / 20

Speedwoofer 10 S Features

Exclusive Compression Guide Technology Tuning

Precision 10” woofer with heavy, die-cast aluminum frame, massive magnet structure and
motor assembly. This allows the cone, along with its surround to achieve high excursions,
delivering deep, powerful bass with complete control and linearity.

Powerful 350 Wa RMS Digital Ampli fi er. This e ffi cient ampli fi er minimizes power con-
sump on (around 1 wa in standby mode). Because ampli fi er standards are not strictly
enforced, many manufacturers would rate this ampli fi er at a much higher wa age. If this
ampli fi er were rated in peak power (a speci fi ca on we don’t agree with) it would be rated
in excess of 800 wa s.

Dense MDF wooden cabinet with internal bracing. Unlike most subwoofers, the Speed-
woofer 10S’s enclosure is completely fi lled with damping material to further reduce un-
wanted resonances.

Wireless capability. The Speedwoofer 10S has a wireless receiver built in. If you are unable
to run an audio cable to the subwoofer, you can purchase our op onal wireless transmi er
and get full performance wirelessly.
First Steps

Be careful when using sharp objects to open box-
es. The inser on of a long and/or sharp object
such as a blade can damage the components in-
side. Use of chainsaws, machetes, power tools,
explosives, light sabers, and most kitchenware is
not recommended. If in doubt, ask mommy to
help you.

Please take a moment to inspect your subwoofer
for damage. If you fi nd any damage that you did
not speci fi cally request, please contact us or the
shipping company immediately. All components
have been inspected when leaving our factory;
however damage can occur during shipping.

If possible, we recommend saving all packaging, including boxes, as a convenient means of
re-packaging for moving or for sending your subwoofer in for service (in the unlikely event
they need it).

You will need either an RCA cable or the op onal wireless transmi er to connect the sub-
woofer. If you purchase an RCA cable, you do not need to buy an expensive one. Subwoof-
ers reproduce a narrow band of frequencies, typically 20-200 Hz. Do not allow some slick ,
fast-talking, know-it-all salesperson to convince you to spend a lot on this cable. Just pur-
chase a cable that is constructed well enough to last.
4