5
FITMENT OF THE RSI SMARTCANOPY TO VEHICLE
STEP
SEVEN
1. P
LACE THE 2 LOAD SPREADER PLATES OVER THE 3 HOLES ON BOTH FRONT END BRACKETS AS
INDICATED BELOW.
2. U
SE
SIX M8 X 30 SE
T
SCREWS WIT
H
T
W
ELVE M8 FL
A
T WASHERS AND SIX M8 NYLOC NUTS TO L
O
OS
E
L
Y
FASTEN THE RSI SMARTCANOPY TO THE FR
ONT
MO
UNT BRACKETS THROUGH THE LOAD SPREADER PLATES.
3.
USE TWO M8 X 30 SET SCREWS WITH FOUR M8 FLAT WASHERS AND TWO M8 NYLOC NUTS TO LOOSELY
FASTEN THE RSI SMARTCANOPY TO THE REAR MOUNT BRACKETS.
4.
ONCE ALL THE SET SCREWS ARE IN THEIR CORRECT POSITIONS, FASTEN TO 25NM.
Repeat process for the opposite side.
M8 Flat Washer
M8 Nyloc Nut
M8 Flat Washer
M8 X 30 Set Screws
M8 Flat Washer
M8 Nyloc Nut
Load Spreader Plate
M8 X 30 Set Screws
M8 Flat Washer
