RSI VIDEO TECHNOLOGIES videofied WMB Скачать руководство пользователя страница 3

Keys

Description

Panic

The panic request is launched in two steps:
1.  3 second press on the PANIC key
2.  1 second press on one of the three assistance keys
 - The transmitted event type and siren activity depend on programming

OK

Used to confirm any data capture or acknowledge messages

ESC

Exits the current menu or cancels all data entered

CLR

Deletes the last character entered

Symbols

The symbols:     1 . _ @ $ , ‘ ? ! ; : “ (     =space) are accessed through the 1 

key

• With multiple 1 second presses on the 1 key, the user is able to select the 

symbol they are looking for.

• By pressing and holding the 1 key, the line with all symbols will show.  Use 

the arrow keys to select the symbol and press OK to confirm.

Special 

Characters

Special Char0-*#=/%& ¥<>() are accessed through the 0 key

• With multiple 1 second presses  on the 0 key the user is able to select the 

special character they are looking for.

• By pressing and holding the 1 key, the line with all symbols will show.  Use 

the arrow keys to select the symbol and press OK to confirm.

Capital Letter

Press and hold appropriate letter key then repeat press

Auto-Repeat 

mode

When a user holds an arrow key, the keypad will scroll all available values

Re-sync and 

Enrollment

Press and release ESC/NO and CLR buttons simultaneously

3. Product Overview

LCD display 
with automatic 
backlight

Arming Keys

Red / 
Green LED

6. Keypad Use

4. RFID Tag Reading

The WMB keypad is equipped with a badge 
reader ISO/IEC 14443A.  The optimal reading 
area is located around the Videofied symbol.  
Compatible with MiFare 13.56 MHz 1K/4K badges 
(VT100).

The badge reader is inactive until approached 
by a user.  The system utilizes a capacitive 
detector to energize the badge reader.  It is 
recommended the user holds the badge in place 
rather than a quick swipe.

When a badge is detected the Green LED is lit 

Menu Navigation
Assistance Requests

5. Security

- Remove batteries before any maintenance

- WARNING, there is a risk of explosion if a  

 

  battery is replaced by an incorrect type!

- Observe polarity when inserting batteries

- Do not throw away used batteries they must   
  be properly disposed of according to  

 

  Hazardous material regulations for Lithium   
 batteries

RFID Badge 

reading zone

Legend

Chime Activation
System Status
Direct Bypass

WMB X2X

WMB X1X

www.videofied.com

Keypad WMB

I N S T A L L A T I O N   D A T A   S H E E T

Содержание videofied WMB






Отзывы: