L
oop
DVP-HD
User Manual
Viewmode #
Where # is the value of one of the following options, used to define playback mode for video files.
0*
-
Fill the screen. Aspect ratio may change.
1
-
Centre the image and add black border (Letterbox mode) Aspect ratio is maintained
2
-
Centre the image and fill screen. Aspect ratio is maintained
Imagemode #
Where # is the value of one of the following options, used to define display mode for static image files.
0*
-
Centre the image without scaling (image may be cropped if image resolution is greater than
output
resolution)
1
-
Scale image to fill the screen as much as possible while maintaining aspect ratio.
2
-
Scale image to fill entire screen. Aspect ratio is maintained, image may be cropped.
3
-
Scale image to fill entire screen. Aspect ratio may be changed.
Slideinterval #
Time between different image files where # is an integer number of seconds. (NB may be inserted
multiple times in a playlist to change interval times for different images)
Transition #
Define the transition between static images where # is the value relating to one of the following options:
0*
-
No
transition
1-4
-
Wipe from top, bottom, left, right.
6-9
-
Start in top left (6), top right (7), bottom left (8), bottom right (9), corner, and grow to
full
screen
10-11
-
Multiple stripes, wipe left to right (10), top to bottom (11)
12
-
Vertical stripes, wipe alternatively top to bottom and bottom to top
13
-
Horizontal stripes, wipe alternatively left to right and right to left
14
-
Fade to black and then to new image
15
-
Fade between images
16-19
-
Slide in from top (16), bottom (17), left (18), right (19)
Pause #
Pause the playback between playlist items for # seconds (# must be an integer). The image on-screen is
retained.
PauseMS #
Pause the playback between playlist items for # milliseconds (# must be an integer). The image on-
screen is retained.
PowerSaveModeOn
Turn off the synchronisation signals for the VGA and component outputs. For many screen models this
will provoke standby mode to reduce power consumption
PowerSaveModeOff
Leave synchronisation signals for VGA and component outputs active.
