rsbp FLEX C Series, Руководство пользователя

Страница: 5 / 35

Flameless Explosion Venting Device
–
FLEX
5 35
1
1.3 THE PURPOSE OF THE OPER ATING AND MAINTENANCE INSTRUCTIONS
These operating and maintenance instructions are intended for all the staff who are expected
to come into contact with the FLEX device during their work.
The operating and maintenance instructions are an integral part of the product and the
manufacturer cannot be held liable for any damage or injuries caused as a result of
insufficient knowledge of these instructions. Therefore, it is necessary that the user reads
through this manual and any other documents thoroughly and communicates them to the
appropriately qualified personnel (electric, mechanical, technological, safety engineers and
others). The provisions concerning the operation and maintenance should be incorporated
into the operating rules, maintenance schedules and other documents by the user.
If the user is in doubt, he/she should contact the company RSBP spol. s r.o. or its authorized
representative.
The customer should pay increased attention mainly to chapter 4 concerning the
proper installation because FLEX is the device, whose improper installation, operation
and maintenance may endanger the human life.
FLEX can be installed, operated, serviced and repaired only by an authorized person.
The authorized person must be trained and certified either by the company RSBP
spol. s r.o., or by its authorized representative. The certification must be renewed
every 2 years.
1.4 WARRANTY CONDITIONS
This product was manufactured with the most advanced, high-quality materials, and it was
thoroughly inspected before dispatch. However, if any defect or damage occurs during
storage, installation, operation, cleaning or servicing, the user is obliged to notify the
manufacturer immediately and in writing.
The manufacturer shall replace the damaged or missing parts of the products in the shortest
possible time.
This product is covered by a warranty period of 2 years.
The warranty cannot be exercised in the following situations:
✓
The user did not familiarize himself/herself with these operating and maintenance
instructions.
✓
The product was not used in accordance with these operating and maintenance
instructions.
✓
The authorized person performed insufficient or improper installation or maintenance.