RS IDM67, Инструкция по эксплуатации

Страница: 17 / 28

16
TEST EQUIPMENT RISK ASSESSMENT (UK RECOMMENDATION)
Users of this equipment and/or their employers are reminded that Health and Safety legislation require them to carry
out valid risk assessments of all electrical work so as to identify potential sources of electrical danger and risk of
electrical injury such as from inadvertent short circuits. Where the assessments show that the risk is significant then
the use of fused test leads constructed in accordance with the HSE guidance note GS38 "Electrical Test Equipment
for use by Electricians" should be used.
3-2 Voltage Measurements
1. Connect the red test lead to the "V
Ω
 " input terminal and the black test lead to the "COM" terminal.
2. Set the rotary function selection to ACV or DCV position.
3. Connect the test leads to the device to be measured.
4. When the input is over-ranged the “OL” is displayed.
5.

"Warning : Do not exceed 600Vd.c. or 600Va.c. limits stated in the specification".