Page 14
To begin press enter to zero the encoder.
Figure 14: Calibrate Encoder -Enter Distance to Calibrate Over
Enter the distance of cable to calibrate the system with. Ten feet (or meters) is enough to provide an accurate count, but
longer distances can be used to create an even more accurate count.
Figure 15: Calibrate Encoder - Pull Cable
Pull the cable off of the reel for the set distance entered. Make sure that the cable has been measured accurately or it will
through the whole calibration off. Once the cable has been pulled press enter to close the calibration window.
Once all of the Encoder options have been set, Press enter to save and close. To cancel and close, press ESC.
