RS PRO ISM 410 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 22

RS PRO ISM 410 Скачать руководство пользователя страница 17

Datalogging Solar Power Meter / EN

08/15/16 Version No. 01

14

3. Manual memory data READ

Push "READ" key to read manual recorded data.

The LCD then shows " R " mark.

Push “

” or “

” key to select the desired memory

address number data for display.

Push “

↵

” key to exit.

5-6 Disable Auto Power off Function

The meter will turn off automatically if no key is pushed for 10
minutes.

Disable auto power off function :

1. Push "

" key to turn off the meter.

2. Push and hold "HOLD" key when turning on the meter

again, the auto power off function will be disabled. The
auto power off symbol "

÷

" will disappear.

3. Auto power off function will be actuated every time the

meter is turned on.

5-7 Setting the Calibration Function (CAL)

The  calibration  factor  CAL  serves  to  calibrate  the  result
display.    The  solar  power  value  measured  internally  is
multiplied  by  the  value  of  CAL  that  has  been  entered  and
the resulting value is displayed or stored.  The CAL setting
range  is  from  0.000  to  9.999.    The  calibration  factor

«
...
15
16
17
18
19
...
»

Содержание ISM 410























Отзывы:

Нет отзывов