RS PRO ILOM-508A, Инструкция по эксплуатации, Страница: 4 / 41

Milliohm Meter/ English
EN-2 2016-9-10 / V001
Feature:

Very low impedance measurement by Four Wire type one pair coated clip.

There is a fuse (0.5A/250V) to protect the input circuit.

Applicable measurement of Resistance, Motor coil, Transformer, Printed Circuit
Board.

Accurate measurement of conductor, light electricity and welding point.

Wide measurement range, 0.1 m
Ω
to 20k
Ω
in 6 positions.

D
– H Switch: Lockup readings for LCD display.
General:

Display: 3-1/2 digits, LCD display with max. reading of
1999 with decimal point and measurement
unit.

Overload indication:
“OL” indication.

Zero Adjust: External zero adjust knob.

Low battery indication:
Replace battery as LCD display “ ”.

Reading speed: 2.5 times per second.

Operating attitude: Max. 2000 meters above level.

Operating ambience: In-door use, under environmental pollution
grades two

Operating temperature and
R.H. value:
5°C to 40°C, 80%RH or lower.

Storage temperature and R.H.
value:
-10°C to 60°C, 70%RH or lower.

Power supply: 1.5V × 6 NEDA 15F IEC R6 Alkaline battery.

AC adapter (not included): An optional accessory with the specification
required as followings:
AC input voltage: 100V AC to 240V AC 0.3A
with input frequency of 60 HZ or 50HZ.
DC output voltage: 9V DC.
DC output current: 0.5A DC.
Socket: pin ground casing positive with
external diameter 3.5mm and internal
diameter 2.0mm.

Dimension and weight: 160 x 100 x 52mm. approximate 500g.

Accessories: Carrying case, one set of testing clips and
instruction manual.

Fuse specification: 0.5A/250V, 5Ø x 20mm. FAST MIN
INTERRUPTS RATINGS 1500A.