RS PRO ICM A6N, Инструкция по эксплуатации, Страница: 3 / 17

EN - 3
- Verify the instrument is operating correctly
by measuring a known voltage before
use. If in doubt, have the instrument
serviced.
- Do not apply more than the rated voltage
as marked on the instrument between
terminals, or between any terminal and
earth ground.
- Use caution when measuring voltages
above 30 Vac rms or 60 Vdc. These
voltages pose a shock hazard.
- To avoid incorrect readings that can lead
to electric shock, replace the battery as
soon as low battery indicator
<
appears
in the display.
- Disconnect the circuit power and
discharge all high-voltage capacitors
before making resistance, continuity, or
diode measurements.
- Do not use the instrument in a Hazardous
Area or around explosive gasses or
vapours.
- Wear suitable Personal Protective
Equipment when working around or near
hazardous Live conductors which could
be accessible.

Caution
- Disconnect the test leads from the test
points before changing the position of the
function rotary switch.
- Never connect the instrument to a source
of voltage with the function rotary switch in
Ω/

; /
 
A position.
- If possible, do not work alone, so
assistance can be given if required.
- Do not expose the instrument to extremes
of temperature or high humidity.