S1
&
S2 & S3 / EN
6
Making Basic Measurements
CAUTION
When connecting the test leads to the DUT (Device Under
Test) connect the common test leads before connecting the
live test leads ; when removing the test leads, remove the live
test leads before removing the common test leads.
Measuring Voltage
Preparation and Caution Before Measurement
Observe the rules
of
Warnings
and
Cautions.
Dial the switch to select the measuring function.
CAUTION
Do not use the LoZ mode to measure voltages in circuits that
could be damaged by this mode’s low impedance.
