RS PRO 1410-1002, Руководство по эксплуатации, Страница: 11 / 40

Operating Manual RS 1410 page 11 of 20
CAUTION
Damage!
If the batteries have different charge levels, leaks and thus damage to the product can
occur.
– Use new, high-quality batteries!
– Do not use different types of batteries!
– Remove depleted batteries and dispose of them at a suitable collection point.
_
NOTE
This symbol indicates processes, which can have a direct influence on operation or
can trigger an unforeseen reaction in case of non-observance.
NOTE
Read the following handling instructions before replacing batteries and follow them
step by step.
If disregarded, the product could be damaged or the protection from moisture could be
diminished.
1. Unscrews the Phillips screws (A)and remove the cover.
2. Carefully replace the two Mignon AA batteries (B). En-
sure that the polarity is correct! It must be possible to in-
sert the batteries in the correct position without using
force.
3. The O-ring (C) must be undamaged, clean and posi-
tioned at the intended depth. In order to facilitate assem-
bly and avoid damage, a suitable grease can be applied.
4. Fit the cover on evenly. The O-ring must remain at the
intended depth!
5. Tighten the Phillips screws (A).