10 Bay Battery Charger PMC10A
Instruction Manual
This user’s guide contains information on using the
10 Bay Battery Charger PMC10A
. Please read this guide
before using the battery charger.
Technical Data
Power Requirements
100-120V / 60Hz ~ 4.3A : 220-240V / 50Hz~ 1.8A
Operating Temperature
41°F to 95°F (5°C to +35°C)
Non-Operating Temperature
14°F to 140°F (-10°C to +60°C)
Operating Humidity
10% to 90%
Non-Operating Humidity
5% to 95%
Dimensions (without battery adapter): (LxWxH) 8.9inch x 21.9inch x 6.7inch
Weight (without battery adapter):
11 pounds
Fuse Information:
F10/F11 = Hollyland Co., 50T series T5A, 250V
CAUTION: For continued protection against risk of fire, replace only with the same type and rating of fuse.
Use
Place the charger on a stable surface. Plug the power cord into the power connector on the back of the
charging station. Then plug the other end of the power cord into an AC outlet. Press the switch on the ON
position.
The charge process will start after inserting a battery pack into the proper module, the charge indication will
be displayed (see following process matrix).
On the front of the charger there are five LED front foils (one master front foil and 4 slave front foils):
Master
Front
Foil
Slave
Front
foil
Device Status identification
LED indicator
Charging condition
None Off
mode
GREEN on (N°1)
AC power input/ power on
N°2 N°3 N°4
N°1
N°2 N°3 N°4 N°2 N°3 N°4