RPS LJ12, Инструкция по эксплуатации

Страница: 11 / 21

RPS INSTRUCTION MANUAL Type LJ - High Speed Auxiliary Relays
Receiving
Upon receipt of the relay, inspect the relay to verify that its model
number agrees with the requisition. Also check for damage which
may have been sustained in transit. If damage is evident, file a
claim with the transportation company and notify your supplier or
Relay & Power Systems directly at 610-941-2900. If the unit is to
be stored, Relay & Power Systems recommend keeping the relay
in its original packaging to protect the unit. W hen handling the
relay, exercise reasonable care as to avoid s evere impacts.
Installation
The relay is shipped from the factory pre-configured to
the customer’s specifications and should not require an y
modifications on site. Mount the relays vertically on switchboard
instrument and control panels for proper target operation. Refer
to Figures 4 & 5 for LJ panel cutout and drilling dimensions,
respectively. Panel fasteners are included in the shipping
carton . Recommended terminal block and wiring connections for
different LJ models are shown in figures 1, 2, 3 and 6).
Adjustments
LJ relays have been designed with no maintenance or
adjustments required to maintain reliable operability within
specified ratings.
Page 11 of 21