RPS Studio RS-SB/300SLK Скачать руководство пользователя страница 8

1 Year Limited Warranty. 

Dot Line Corp. warrants that if the accompanying product proves to be
defective to the original purchaser in material or workmanship within 1
year from the original retail purchase, Dot Line Corp. will, at its option,
either repair or replace same without charge (but no cash refund will be
made).

What you must do to enforce the warranty

: You must deliver, mail or

ship the product together with the original bill of sale, to: 

Dot Line Corp. 9420 Eton Ave., Chatsworth, CA 91311 

Phone 1-800-423-2624 Fax 818-700-9797.

 

Limitation of Liability and Remedies

: This warranty is void if any

defects are caused by abuse, misuse, negligence or unauthorized
repairs. All liability for incidental or consequential damages is specifically
excluded. The company shall have no liability for any damages due to
lost profits, loss of use or anticipated benefits, or other incidental,
consequential, special or punitive damages arising from the use of, or
inability to use, this product, whether arising out of contract, negligence,
tort, or under any warranty, even if the company has been advised of the
possibility of such damages. The Company’s liability for damages in no
event shall exceed the amount paid for the product. The Company
neither assumes nor authorizes anyone to assume for it any other
liabilities.
Some states do not allow for the exclusion of incidental or consequential
damages, so the above exclusion may not apply to you. This warranty
gives you specific legal rights and you may have other rights which vary
from state to state.

RPS Studio Products are Marketed exclusively by:

Dot Line Corp. 

9420 Eton Ave.

Chatsworth, CA 91311

818-700-9997 •   Fax 818-700-9797

www.dotlinecorp.com

email: [email protected]

Product Made in China   © Dot Line Corp. 2008

These Instructions are for RS-SB/300 monolites. Pictures may vary.
Specifications are subject to change. Printed March 2009.

Содержание RS-SB/300SLK









Отзывы: