RPM Systems Corporation
March, 2016 Page 13
MPQ Manufacturing Programmer User's Guide
tor to define an address in target microcontroller memory which can contain a 2-bye, 4-byte or 6-byte binary
serial number, which is automaticall incremented by the programmer for each subsequent device programmed.
The serialization dialog is invoked from the Load Image dialog. It allows the user to select a target address for
the serial number, a memory space (Flash or EEPROM, depending upon the device family), the size of the serial
number area in the target memory, in bytes, and the starting serial number value. The byte ordering of the serial
number information written to the target is selectable, LSB first or MSB first.
After the image has been loaded, and after any number of programming cycles, the current serial number
for each image can be viewed from the Image Manager window by selecting the image bank, then selecting
View Serialization from the Image menu, or by right-clicking on the image in the Image Manager, and select-
ing View Serialization from the popup menu.
