b. Menus
There are two kinds of menus used in the YagTracker firmware:
Pop-Up:
These menus are activated while on one of the main screens by pushing in
the rotary encoder switch momentary. If a menu is available, it will pop up in a small
window. You can then rotate the rotary encoder to select an item, then click the rotary
encoder button one time to select the item. You may exit the menu by pressing the
Beacon/Escape button momentarily.
Full Screen:
These menus are accessed by first using the Pop-Up menu method on
any of the main screens and selecting the Main Menu item in the pop-up menu. This
will bring up a full screen menu with Icons. Selecting an icon and clicking the rotary
encoder’s button will open up the menu associated with the icon.
