RPB L4 light, Инструкция по эксплуатации, Страница: 5 / 24

55

Ensure that equipment is properly set up, used, and maintained.
Make sure that equipment is properly set up, inspected, fitted, used, and maintained,
including using only RPB
®
batteries and chargers made specifically for the L4
™
Light.

Dispose of the battery in accordance with local regulations.

If you have any questions, contact RPB ® .
 Call Customer Service Department at:
Tel: 1-866-494-4599
Email: customerservice@rpbsafety.com
Web: rpbsafety.com
PRODUCT USER SAFETY INSTRUCTIONS
MAKE SURE THE SYSTEM IS READY FOR USE
Make sure you have a complete unit.
Verify that you have all components for the L4
™
Light:

L4 ™ Light
 09-532-2 Battery

09-525 Power Supply with the correct Power Cable for your country

The L4 ™ mounted to the Nova 3
®
helmet according to these instructions
Do not modify or alter any part of this product.
Inspect
all components daily for signs of damage or wear and tear. Remove any damaged
component, including the lens or housing that has been subject to impact or other damage, from
service until replaced. Scratched or damaged lenses or other components should be replaced with
genuine RPB
®
brand replacement parts. The lens must fastened securely, as it forms part of the
seal to keep moisture, dust and other debris away from the electrical components inside. Inspect
the battery pack for damage before each use.
Make sure that the light is correctly assembled. Never use the light without the lenses in place.
DO NOT ENTER THE WORK AREA
if any of the following conditions exist:
 You cannot escape without the aid of the L4
™
Light in case the battery dies or another problem
occurs.
 When flammable or explosive atmosphere is present.
 The temperature is outside the range of 14°F to 140°F (-10°C to +60°C).
PRODUCT CARE
Never place the light on hot surfaces. Do not apply paints, solvents, adhesives or self-adhesive
labels except as instructed by RPB
®
.