MODULAR MERCHANDISING ASSEMBLY: “T” UNIT
G (2)
A (2)
B (2)
D (2)
C
(2 left hand, 2 right hand)
E (2)
F (1)
H (8)
J (4)
K (4)
L (4)
PARTS:
Slatwall shown is optional
Страница 1: ...MODULAR MERCHANDISING ASSEMBLY T UNIT G 2 A 2 B 2 D 2 C 2 left hand 2 right hand E 2 F 1 H 8 J 4 K 4 L 4 PARTS Slatwall shown is optional ...
Страница 2: ...as shown 1 J K B J 2 Insert the Wire Grids G into the channels on Upright B Note the Wire Grids G must be inserted so that the vertical wires are inside the frame B G 2 The end of the Wire Grid must fit into the hole at the bottom of the Upright channel Make sure the horizontal wires that are set close together are at the bottom of the unit C B MODULAR MERCHANDISING ASSEMBLY T UNIT ...
Страница 3: ...ghts Top of Uprights Insert open ends of the Wire Grids G 2 G into the channels on the second Upright B as shown Next fasten with Screws K as previously described B B G 2 ASSEMBLING FRAME 2 MODULAR MERCHANDISING ASSEMBLY T UNIT If the unit will be connected to another T unit slide the two units together and connect as shown using the bottom and top connector pieces B E ...
Страница 4: ...into locking tabs on either end of the frame SHELVES Shelves can be added at either a right angle or 15 degree tilt 3 ADDING KICKPLATES AND BASE SHELVES Hook Kickplates A onto tabs on Wings C as shown C B L F A D Locking Tabs Once Kickplates A are in place insert tabs on Base Shelves D into the first slots on Uprights B Insert Plugs L into each Upright B and push completely down MODULAR MERCHANDIS...
