Royalcraft Walton Скачать руководство пользователя страница 2

          Walton Coffee Set 

 

     

Assembly Instructions

 

 

 

Produced in China for A. Mir & Co., Ltd. 

© A. Mir & Co., Ltd.                         

                                                                                                                                 

2 / 9 

 

www.royalcraft.co.uk

 

Before you start

Warnings 

 

IMPORTANT, RETAIN FOR FUTURE REFERENCE 
READ CAREFULLY 
 

See enclosed instructions for assembly, safety and care 
information. 
 
Failure to follow the warnings could result in serious injury. 
 
Handle heavy parts with care. 
 
Ensure that this product is fully assembled as illustrated before 
use. 
 
This product should only be used on firm, level ground. 
 
Keep small parts out of reach of children. 
 
Do not stand or climb onto this product. 
 
This product is intended for 

domestic use

 only. 

 
Furniture can be dangerous if incorrectly used. No liability will be 
accepted for damage or injury caused by incorrect use of this 
product. 

 

Dos 

 

When you are ready to start, make sure that you have the right 
tools, plenty of space and a clean, dry area for assembly. 
 
Remove all packaging and banding and place the components 
carefully on suitable surfaces to prevent damaging or scratching 
them.   
 
Check the pack and make sure you have all of the parts listed. 
 
Check all screws and bolts are tightened and inspect regularly. 
 
 
This product is suitable for all year outdoor use, but we 
recommend that a furniture cover be used to add additional 
protection to your product when not in use. 

 
 

During severe weather conditions and in the winter months we 
recommend moving your furniture inside into a cool, dry place. 

 

Before storage, ensure that the product is clean and dry. 
 
To clean, wipe down with a sponge and warm soapy water and 
wipe with a clean, dry cloth. 
 
Cushions should be cleaned following the care instruction on the 
label. 
 
 
 
 
 
 
 

Don’ts 

 
Do not use scourers, abrasives, washing powders, chemical cleaners 
or any other substances containing abrasives since these substances 
can damage the product, including the glass panel. 
 
Never tilt the chair during use. 
 
Do not place very hot or very cold items on the glass surface 
unless adequately thick table-mats are used to prevent such 
items from coming into contact with the glass. 
 
Do not use the glass as a chopping surface. Do not strike glass 
with hard or pointed items. 
 
Do not strike the glass with hard or pointed items. 
 
Do not use power tools to construct this product. 
 
Do not use this product if parts are missing, damaged or worn. 
 
Do not sit or lean on the table. 
 
Do not stand or climb onto the product and do not use it as a ladder, 
as this could lead to it unbalancing and overturning. 
 
Never drag furniture when moving it, always lift it. 

 
Number of people required for assembly 
 

Two people. 
 

 
 
 
Time to assemble 
 

  40 minutes 

 

Tools required 

 

 
 

Tips:   
Do NOT fully tighten bolts before 
all components are connected. 
Only fully tighten once you are 
satisfied with the alignment of all 
components. 
Do not overtighten bolts.   

 

Содержание Walton










Отзывы: