2
2)
SPECIFICATIONS AND SAFETY
MODEL:
Royal 140DX
Electronic Cash Register
DISPLAY:
LCD Display. Front display for cashier. Symbols for error,
change, subtotal, minus, total and item count.
CAPACITY:
Total: 9-digit display with 7 numeric-digits input and readout.
PRINTER:
Impact, numeric only serial printer.
INK SOURCE:
Black or Purple Ink Roll,
MS37902
(ROYAL brand part # 013109)
PAPER SUPPLY:
57/58MM (2
¼”
) Single-Ply, Bond Register Tape
(ROYAL brand part #013129)
MEMORY PROTECTION:
Approximately 30 days after power interruption.
3 Size AA
(1.5-Volt)
Batteries
(User installed. Included with unit)
TECHNOLOGY:
CMOS RAM
OPERATING TEMPERATURE:
0-40 Degrees Centigrade (32-104 Degrees Fahrenheit)
DIMENSIONS:
14
¼”
D x 13 1/2
”
W x 7 5/8
”
H
WEIGHT:
9.4 lbs.
WARNING
FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE
STATEMENT INFORMATION TO THE USER:
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. If applicable, connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for assistance.
Connection of peripherals to this unit requires the use of grounded, shielded cables to
ensure compliance with the Class B FCC limits.