RMT Series
6
4. INSTALLATION
Note: The trimmer should be installed by a trained service technician
The trimmer needs to be assembled by a trained installer.
The trimmer should only be used in an area with the following characteristics:
•∙Protection∙from∙atmospheric∙agents
•∙Proper∙illumination
4.1 Box contents
Thoroughly inspect the parts and the unit. It is imperative that any missing parts are reported and a
claim is filed with the reseller immediately upon receipt of shipment.
Part Name
Quantity
Picture
Main
Box
Main Trimmer Assembly
1
Floor Stand Side Frame
2
Floor Stand Cross Bar
1
Owner's Manual
1
Wastecatcher Square Bars
2
Fabric Holder Bars
4
Tool
Box
L-wrench (5)
L-wrench (8)
1
1
5/16 Hexa head bolt (M8*55mm)
Spring washer (Ø8.2)
8
8
E-ring (Ø8)
8