RMF-BC-46SS
7
CARE & CLEANING
Cleaning and Maintenance
Warning:
To avoid electric shock, always unplug your beverage cooler before cleaning. Ignoring this
warning may result in death or njury.
Caution:
Before using cleaning products, always read and follow manufacturer’s instructions and warnings to
avoid personal injury or product damage.
General:
• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use sponge
or soft cloth, dampened with the cleaning solution, to wipe down your beverage cooler.
• Rinse with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents or metal scouring
pads Some of these chemicals may dissolve, damage and/or discolor your beverage cooler.
Door Gaskets:
• Clean door gaskets every three months according to general instructions. Gaskets must be kept clean and pliable to
assure a proper seal.
• Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and ensure a good seal.
Defrosting Your beverage cooler
Your beverage cooler is designed with a manual defrost system. The beverage cooler surfaces will defrost, when the unit
is unplugged. Water from the unit is disposed of automatically, by means of being channeled onto a drip tray located on
the compressor. Heat transfer from the compressor causes this water to evaporate.
Power Interruptions
Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC
outlet when a power outage occurs. When power has been restored, replug power cord to AC outlet.
Vacation and Moving Care
For long vacations or absences, empty contents from beverage cooler, unplug the unit and clean the beverage cooler and door
gaskets according to “General cleaning” section. Prop doors open, so air can circulate inside. When moving, always move the
beverage cooler vertically. Do not move with the unit lying down. Possible damage to the sealed system could occur.