RET Series
8
4.3 Assembly
1. Open the box carton and remove all parts.
2. Open the tool-box. (Fig. 4-1)
This operation must be carried out by a minimum of two people
3. Attach the lower cross bar to the left floor stand side frame and right floor stand side frame using the
supplied screws (M8x55). (Fig. 4-2)
4. Slide the holder rods into the adjacent holes of the assembly in accordance with Fig. 4-3. Using
pinchers, place the E-rings into the appropriate mounting slots of the holder rods. (Fig.4-4)
rear
front
Fig. 4-3
Fig. 4-4
Fig. 4-2
Fig. 4-1