RBW-1500
3
1. INTRODUCTION
Thank you for choosing a Royal Sovereign RBW -1500. It has been designed and manufactured to provide years of
continuous service. For complete operating and maintenance information please read this manual thoroughly. Upon
receipt of your Banner Welder, please inspect the box, the machine and all other contents for shipping damage. Damage
should be brought to the immediate attention of the delivering carrier (See page 6 for list of shipment elements).
2. SAFETY PRECAUTIONS
Failure to comply with any of the following safety procedures could result in serious injury. Please read all instructions
carefully and keep for future reference. Royal Sovereign International Inc. cannot be held responsible for any damages to
people, animals or objects due to noncompliance with the safety norms and recommendations of these documents.
1. Only a licensed electrician should install wiring and outlet for the Banner Welder.
2. Ensure the unit is plugged into a properly grounded outlet with the correct voltage.
3. During operation, keep hands away from heating blocks and avoid inserting foreign objects into the machine.
4. Keep flammable and wet objects away from the machine.
5. Place machine on a level surface.
6. Avoid excessive sunlight, humidity and extreme temperatures.
7. Ensure the unit is turned off and unplugged from the outlet prior to moving and/or repairing.
8. Keep out of reach of children.
9. Only Royal Sovereign authorized maintenance and service technicians should make repairs.
10. Do not attempt to weld items that exceed total recommended material thickness for the unit.
13. Tampering with the protections and safety devices is dangerous for the people using the machine and for those
exposed to it. Royal Sovereign International Inc. cannot be held responsible for any damages to people, animals or
objects due to tampering with the protections.
14. Pay attention to the danger notices on the Banner Welder.
