Auto and Manual Start Modes
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start
mode, press "AUTO", insert the bills into the hopper, and press "
START
/
RESET
". Press "AUTO" again to return to auto mode.
Dimensional Detection
To manually turn the DD function on/off, press the "DD" button.
The DD indicator light will light up showing that the function
has been turned on.
If the machine detects a counterfeit note, it will stop counting
.
The preset display will show DD.
Remove the suspicious note and press "START" to continue counting.
SET Key Function
Use the "SET" button to adjust the sensitivity of
the
Dimensional Detection and Double Note Detection. Press
the
“SET” key
once, the preset window will display DD, and the counting window will display 1~5. These numbers are for DD sensitivity, 1
is for the lowest, and 5 is for the highest. Press the number key to set it directly. Press
the
“SET” key twice, the preset
window will display Double, and the counting window will display 1~5. These numbers are for Double sensitivity, 1 is for the
lowest,
and
5 is for the highest. Press the number key to set it directly.
Batch Counting Mode
The machine is preset to common counting mode. To count bills in batches, press
"
BATCH
"
. To change batch amount, use
the keypad to enter a batch number between 1 and 999. Press
"
BATCH
"
or
"
CLEAR
"
key to clear.
Add Mode
Use this mode to add the quantity of bills counted to get an accumulative total. To set the machine to add mode, press the
"ADD" button. The add indicator will light, showing that this mode is turned on. Place bills into the hopper and the machine
will automatically begin to count them. When you remove the counted bills from the stacker and place new bills into the
hopper it will continue counting where it left off on the previous set of bills. To stop using the add mode press the "ADD"
button again and the indicator light will shut off.
5
CONTROL PANEL
