RBC-5000
7
dimension detection
The dimension detector measures the width of the center of each bill by using infrared light. If the detector finds an odd
sized bill, the machine will stop counting to allow removal of the bill and display the error code on the preset display. To
use dimension counterfeit detection press the DD button. (To adjust the DD level press the “DD” button for 3 seconds,
the display will show the current size (dd- -5). Press the numeric key 1 to 9 to adjust the level, 1 for lowest, 9 for highest.
After choosing the level number press the RESTART button to confirm .) To disengage this function press the DD button
again.
operation
1. Attach power cable to back of machine, plug into a three prong outlet and turn power switch on. After five seconds the
screen will display a "0" on the left and on the right of the display with the word "AUTO" above the zeros.
2. Select counterfeit detection mode.
To use infrared (IR #7 on the numeric keypad), ultraviolet (UV #8 on the numeric keypad), or magnetic (MG #9 on the
numeric keypad) counterfeit detection while counting press the CF key and then the corresponding detection method on
the key pad.
3. For dimension detection select the "DD" button on the control panel.
4. Select bill counting settings
Bill Counting Speed
Press the Speed button on control panel and continue to press the key until you come to speed setting you wish to use
(800, 1,200, 1,600, 1,900)
Add Mode
To continuously add totals for a cumulative total when counting press the CF key on the control panel then the ADD
button on the keypad (#1 on the keypad). Pree the CF key then the ADD button to cancel the add mode.
Batching Mode
To count bills in batches press the BATCH button on the control panel. Batching is preset to 10 bills. Additional presets for
20, 25, 50,and 100 can be accessed by continuing to press the BATCH button. You can also use the numeric keypad to
enter a batch number between 1 and 999.
Press the clear button "C" to clear the batch setting.
Auto/Manual Start Modes
The machine is preset to automatically start counting bills once they are placed in the hopper. To change to manual start
mode press the "CF" key on the control panel and then the AUTO key on the numeric keypad (# 2 on the keypad). MNL
should be displayed on the screen. (Note: when in manual mode with no batching the number of bills counted will move
from the right of the display over to the left of the display when you start to count a new set of bills.) To return to AUTO
mode press the CF key and the AUTO key (#2 on the keypad) AUTO will now be displayed on the screen.
