7
PRODUCT OPERATION
(CONTINUED)
-
Counterfeit Detection Methods
All methods are automatically on when the unit is powered up. To manually turn off any or all methods see (CONTROL
PANEL - LOCATED ON PAGE 5.)
-
Menu Settings
Press “MENU" key, you will see:
1.
SPEED SET
2.
LEVEL SET
3.
WARN COUNT
4.
DATE&TIME
5.
BEEP
6.
PRINTER
INTERFACE, press “ “ keys and select the item you need, then press RESET- ENTER.
1. SPEED SET
Press the RESET-ENTER key, there are three speeds: SPEED 1,900pcs/min, SPEED2, 1,200pcs/min, SPEED3,
1,400pcs/min. Press the number keys: 1,2,3 or press “ “ key and select the speed, then press RESET-ENTER.
2. LEVEL SET
Press the RESET-ENTER key and enter the setting, it will show
1.
UV LEVEL
2.
MG LEVEL
3.
DD LEVEL
4.
DOUBLE
LEVEL. Press “ “ key and select the item you need, the press RESET-ENTER. Each sensitivity has 5 levels:
(1.low, 3.middle, and 5.high), press number key 1-5 and select the sensitivity level, then press RESET-ENTER key.
3. WARN COUNT SET
Press the RESET-ENTER key and enter the setting, Press “ “ key and select the item you need (YES means the
fake note is included in the amount; NO means the total amount doesn’t include the fake notes), press RESET-ENTER.
4. DATE & TIME
Press the RESET-ENTER key and enter the setting, it displays “YYYY-MM-DD HH:MM:SS”, press the number keys
to set the date and time, press the “ “ key and select the set item, the press the RESET-ENTER key.
5. BEEP
Press the RESET- ENTER key and enter the setting, it will display
1.
KEY BEEP OFF
2.
KEY BEEP ON
3.
WARNING
BEEP OFF 4. WARNING BEEP ON. Press “ “ key and select the set item, then press the RESET-ENTER key and
quit.
6. PRINTER INTERFACE
Press the RESET-ENTER key and enter the setting,
1.
4800bps
2.
9600bps
3.
14400bps
4.
19200bps
5.
28800bps
6.
57600bps, press “ “ key and select the item, then press the RESET-ENTER key and quit.
3.
Place bills into the hopper to begin counting; press “ENTER/RESET" if in manual mode
