Royal Sovereign RBC-4500-CA, Руководство пользователя

Страница: 9 / 28

RBC-4500-CA
9
Dimension Detection
The dimension detector measures the width of the center of each bill by using infrared light. If the detector finds an odd
sized bill, the machine will stop counting to allow removal of the bill and display the error code on the preset display. To
use dimension counterfeit detection press menu key, 2 for Level, 3 for DD, then select number key 1-5, 1 for lowest, 5
for highest, then press Enter/Reset.
oPeRATIon
1. operation preparation
1. Plug in power cable and turn power switch on.
2. Set applicable Menu settings.
2. Menu Settings
Press “menu” key. The menu screen will show the following options:
1. SPEED SET 2. LEVEL SET 3. WARN COUNT SET 4. DATE&TIME 5. BEEP 6. PRINTER INTERFACE, press “ , ” keys and
select the item you need, then, press RESET∙ENTER.
1. SPEED SET
Press RESET∙ENTER key, there are three speeds: SPEED1, 900pcs/min, SPEED2, 1200pcs/min, SPEED3, 1400pcs/min.
Press the number keys :1, 2, 3 or press “ , ” key and select the speed, then press RESET∙ENTER. Note: defaulted to
1200 setting.
2. LEVEL SET
The default setting is set to the most common settings used in counting Canadian currency (both Polymer and Paper).
To make changes to the setting, follow the steps below:
Press Enter/Reset. key and start the setting,it will show: 1. UV LEVEL, 2. MG LEVEL, 3. DD LEVEL, 4. DOUBLE LEVEL.
Press “ , ”key and select the item you need, then press RESET∙ENTER Each setting sensitivity has 5 levels: (1.low,
3.middle and 5. high), press number key of 1-5 and select the sensitivity level, then press RESET∙ENTER key.
Note: defaulted to '3' Setting.
3. WARN COUNT SET
Press RESET∙ENTER key and enter setting, Press “ , ” key and select the item you need (YES means the fake note is
included in the amount; NO means the total amount doesn’t include the fake notes), press RESET∙ENTER.
Note: defaulted to NO.