background image

ERROR CODE DISPLAY AND SOLUTIONS

The display may show some error code in counting, which means there are some problems with the machine. Refer 

to the chart below to solve the error.

Most o

f the errors listed above may be caused by dust or dirt on the inside of the machine.  

K

eeping the 

machine clean is highly recommended

 (Please refer to MAINTENANCE OF THE MACHINE 

 - LOCATED ON 

PAGE

 8).

10

Error code 

Reason

E01

Left counting sensor

E02

Right counting sensor

E03

Left double-notes sensor

E04

Right double-notes sensor

E05

Note-receiving sensor

E06

Note-feeding sensor

E07

Width sensor

E08

UV sensor

EA0

Half sheet.  Eliminate the note. Press RESTART and count continuously.

EA1

Different width or different version notes.  Press RESTART and count continuously.

EA2

Double-notes.  Put the notes from the stacker onto the hopper again, press RESTART to count 

again.  If EA2 often appears, please adjust the position of the bill thickness adjuster. 

EA3

Joined notes.  Put the notes from the stacker onto the hopper again, press RESTART to count again.

EC4

UV Fake note or questionable note. Eliminate this note, press RESTART and count continuously.

Содержание RBC-3100













Отзывы: