8
Cleaning and Maintenance
Troubleshooting
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician
and in accordance with national and local codes.
Before cleaning the unit, disconnect it from the power outlet and let it cool down.
In order to protect the enclosure, do not splash water onto the heater, and never use a solvent like
gasoline to clean the heater.
DO NOT
open the heater or attempt to clean the inside of this heater.
PROBLEM
CAUSE
SOLUTION
Do not feel heat or air flow
No power to heater
Check power connection to heater
Desired room temperature reached. Thermostat will shut off heater once
desired room temperature is
reached.
Auto-Reset has tripped
Unplug heater and allow to cool
down for 10 minutes, then restart.
Heater has fan only setting.
Set to run on low or full power for
heating.