Description
3
Cord wrap / carrying handle
3 Speed fan control
Built in power outlets
Kickstand and Rubber Feet
Air Outlet
Power Cord (Not shown)
Operation
1.
Plug the power cord into a 3 prong GFCI (Ground Fault Circuit Interrupted ) protected outlet.
2.
Place the unit on a stable, flat and dry surface
3.
Adjust the unit angle (0°, 45°, 90°) or 20° (when using the kickstand)
4.
Turn the unit ‘ON’ and set the desired unit to the desired fan speed (low, medium, high)
1
2
3
4
5
6
DAISY CHAIN OPTION
This unit can be used as ‘Daisy Chain’ when multiple units are required to dry a large surface. Using the
dual built in power outlets, you can daisy chain up to 4 units to dry larger areas
Note: This unit has a built in circuit breaker. If the event that the electrical outlet overloads, the circuit
breaker will trip. If the breaker trips, unplug the units and press the circuit breaker to reset the button.
Plug the units back into the electrical outlet and turn on the unit.
1
2
3
4
6
5