6
COLD LAMINATING PROCEDURE
HOW TO USE CLEANING PAPER
1. Place the laminator on a flat, sturdy work surface.
2. Plug the laminator into a power source that matches the laminator's rate
of voltage.
3. Turn the temperature control switch to the COLD position.
4. Switch the power switch to the RUN position. (Power light will light up)
5. Adjust the temperature control switch according to pouch thickness.
6. Wait for the READY light to light up.
7. After the READY light is lit, place item to be laminated into a pouch and then
into the front opening of the laminator.
1. Turn the machine on, after the READY light is lit up, remove the dirt on
the rollers by passing the Cleaning Paper through the machine once or twice.
2. If the outside of the Cleaning Paper gets dirty, fold the cleaning paper
inside out.
3. If the Cleaning paper is bad or you can not use both-sides of the Cleaning
Paper, get new white coated paper at the nearest stationery shop.
Power switch
Temperature control switch
APL-230/330
