ROYAL VORT-X
6
BLENDER JAR ASSEMBLY
The blender jar assembly consists of the blender jar, blade assembly and lid.
• Jar:
Copolyester, easy to clean.
• Blade Assembly:
Stainless steel blades designed to provide smooth, consistent blending.
• Lid:
Vented lid seals liquids within the jar during blending.
NOTE: Do not fill the blender jar beyond its marked capacity.
Operation
Use these steps to get started right away.
1. Place ingredients to be processed inside jar before
powering on.
2. Plug in the blender.
3. Attach the lid to the jar; ensure that it is installed
on the jar completely.
4. Place the blender jar onto the motor base and
rotate clockwise, making sure the jar is secure and
fully seated on the motor base. The numbers 3, 2, 1,
will appear on the screen as a security measure, to
indicate that the blender is ready to be used.
5. Press the power icon located on the lower center of
the control panel.
6. Press the pulse icon or slide your finger along the
speed control arc for manual speed control.
7. When you have completed your blend cycle, turn off
the blender, pressing the on/off button, and remove
the blender jar from the motor base by rotating the
jar assembly counter-clockwise until it unlocks.
8. Lift the jar from the moto base.
9. For best results, clean the blender jar
immediately after blending
10. Press Pause at any point to stop the blending
process. Be careful not to touch the control panel
sensors while the motor is paused. Remember that
the blender features a touch screen system and the
Pulse action could be activated if grazed by the arm
or hand.
11. For best results when blending dry foods, we
recommend filling the blender jar half full.
Cleaning / Care
1. Unplug the blender from the electrical socket.
2. Do not use stiff bristled brushes or abrasive
cleansers to clean the motor base or jar assembly
as this can dull or scratch the surface.
3. NEVER submerge the blender motor in water.
4. After cleaning, we recommend the blender jar be
stored upright.
5. Clean the base by first unplugging the power cord
and then simply wiping the base and control panel
with a damp cloth.
6. The appliance is easier to clean if you do so
immediately after use.
7. If washing the blender by hand, use warm water.
Your Royal Vort-X Blender is also dishwasher safe.
8. To clean the blender Jar, follow these steps:
• Disassemble the Cover: remove the cover and the
twist-off knob.
For best performance, wipe the top of the jar and spout area immediately after each pour. Do not allow food to remain on
the outside of the jar for an extended period of time.
