Royal Enfield Super Meteor 650, Руководство пользователя, Страница: 73 / 124

71
Royal Enfield Super Meteor 650
MINOR MAINTENANCE TIPS
„
Ensure motorcycle is
upright on a firm and flat
surface.
„
Locate a scissor jack
under the engine and
lift motorcycle such that
the front wheel is off the
ground by minimum 15 cm.
„
Loosen and remove fork
clamp bolt from LHS front
fork assembly by using
6 mm Allen key available in
the tool kit.
„
Loosen and remove spindle
bolt from LHS front fork
assembly by using front
spindle adapter, ring
spanner and extension tube
are available in the tool kit.
„
Gently pull out the spindle from LHS by hand
once fully unscrewed.
FRONT WHEEL REMOVAL
„
Gently lower the wheel
such that it comes out of
the fork legs.
„
Remove spacers from
front wheel hub on both
LHS and RHS.
CAUTION
Take care to secure the wheel
spacers and speed sensor
while removing the axle from
the forks.
CAUTION
Do not press the brake lever when front wheel is
removed as this will result in the brake pads coming
too far out of the brake caliper.
„
Place a 4 mm thick wooden piece or cardboard
sheet between the brake pads to avoid pads
activation in the event the front brake lever is
accidently pressed.
„
Take care not to damage the front brake disc
or toner ring as it will affect the braking system
and ABS.
RH LH